Print this page
XXXX introduce drv_sectohz
@@ -2647,19 +2647,19 @@
/* Keep polling the chip until our IO is completed */
/* Driver's timer will not function during panics. */
/* Therefore, timer checks must be performed manually. */
(void) drv_getparm(LBOLT, &time);
- timeout = time + drv_usectohz(1000000);
+ timeout = time + drv_sectohz(1);
while (!(sbp->pkt_flags & PACKET_COMPLETED)) {
EMLXS_SLI_POLL_INTR(hba);
(void) drv_getparm(LBOLT, &time);
/* Trigger timer checks periodically */
if (time >= timeout) {
emlxs_timer_checks(hba);
- timeout = time + drv_usectohz(1000000);
+ timeout = time + drv_sectohz(1);
}
}
} else {
/* Wait for IO completion */
/* The driver's timer will detect */
@@ -3762,20 +3762,20 @@
* to keep the driver going.
*/
/* Keep polling the chip until our IO is completed */
(void) drv_getparm(LBOLT, &time);
- timer = time + drv_usectohz(1000000);
+ timer = time + drv_sectohz(1);
while ((time < pkt_timeout) &&
!(sbp->pkt_flags & PACKET_COMPLETED)) {
EMLXS_SLI_POLL_INTR(hba);
(void) drv_getparm(LBOLT, &time);
/* Trigger timer checks periodically */
if (time >= timer) {
emlxs_timer_checks(hba);
- timer = time + drv_usectohz(1000000);
+ timer = time + drv_sectohz(1);
}
}
} else {
/* Wait for IO completion or pkt_timeout */
mutex_enter(&EMLXS_PKT_LOCK);
@@ -4044,18 +4044,18 @@
hba->reset_state &= ~FC_PORT_RESET_INP;
hba->reset_request &= ~(FC_PORT_RESET | FC_LINK_RESET);
mutex_exit(&EMLXS_PORT_LOCK);
/* Wait for the timer thread to detect the error condition */
- delay(drv_usectohz(1000000));
+ delay(drv_sectohz(1));
/* Wait for the HBA to re-initialize */
i = 0;
mutex_enter(&EMLXS_PORT_LOCK);
while (!(hba->flag & FC_ONLINE_MODE) && (i++ < 30)) {
mutex_exit(&EMLXS_PORT_LOCK);
- delay(drv_usectohz(1000000));
+ delay(drv_sectohz(1));
mutex_enter(&EMLXS_PORT_LOCK);
}
if (!(hba->flag & FC_ONLINE_MODE)) {
rval = FC_FAILURE;