[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.12.6-1 (2013-12-21) [ 0.000000] Command line: vga=788 initrd=/install.amd/initrd.gz rescue/enable=true -- quiet BOOT_IMAGE=/install.amd/vmlinuz [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df19efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df19f000-0x00000000df69efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000df69f000-0x00000000df79efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000df79f000-0x00000000df7fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000df7ff000-0x00000000df7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df800000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: LENOVO 4239CTO/4239CTO, BIOS 8AET64WW (1.44 ) 07/26/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x31e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DF800000 mask FFF800000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask F00000000 write-back [ 0.000000] 7 base 300000000 mask FE0000000 write-back [ 0.000000] 8 base 31E000000 mask FFE000000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01a8e000, 0x01a8efff] PGTABLE [ 0.000000] BRK [0x01a8f000, 0x01a8ffff] PGTABLE [ 0.000000] BRK [0x01a90000, 0x01a90fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x31de00000-0x31dffffff] [ 0.000000] [mem 0x31de00000-0x31dffffff] page 2M [ 0.000000] BRK [0x01a91000, 0x01a91fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x31c000000-0x31ddfffff] [ 0.000000] [mem 0x31c000000-0x31ddfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x300000000-0x31bffffff] [ 0.000000] [mem 0x300000000-0x31bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdf19efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdeffffff] page 2M [ 0.000000] [mem 0xdf000000-0xdf19efff] page 4k [ 0.000000] init_memory_mapping: [mem 0xdf7ff000-0xdf7fffff] [ 0.000000] [mem 0xdf7ff000-0xdf7fffff] page 4k [ 0.000000] BRK [0x01a92000, 0x01a92fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff] [ 0.000000] [mem 0x100000000-0x2ffffffff] page 2M [ 0.000000] BRK [0x01a93000, 0x01a93fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x7faf1000-0x7fffefff] [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000df7fe120 000A4 (v01 LENOVO TP-8A 00001440 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000df7e8000 000F4 (v04 LENOVO TP-8A 00001440 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000df7eb000 0E7FE (v01 LENOVO TP-8A 00001440 INTL 20061109) [ 0.000000] ACPI: FACS 00000000df72d000 00040 [ 0.000000] ACPI: SLIC 00000000df7fd000 00176 (v01 LENOVO TP-8A 00001440 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000df7fc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000df7fb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000df7fa000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: HPET 00000000df7e7000 00038 (v01 LENOVO TP-8A 00001440 PTL 00000002) [ 0.000000] ACPI: APIC 00000000df7e6000 00098 (v01 LENOVO TP-8A 00001440 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000df7e5000 0003C (v01 LENOVO TP-8A 00001440 PTL 00000002) [ 0.000000] ACPI: ECDT 00000000df7e4000 00052 (v01 LENOVO TP-8A 00001440 PTL 00000002) [ 0.000000] ACPI: ASF! 00000000df7ea000 000A5 (v32 LENOVO TP-8A 00001440 PTL 00000002) [ 0.000000] ACPI: TCPA 00000000df7e3000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 00000000df7e2000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: DMAR 00000000df7e1000 000B0 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 00000000df7e0000 0003E (v01 LENOVO TP-8A 00001440 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000df7df000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000df7de000 00292 (v01 LENOVO TP-8A 00001440 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000031dffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x31dffffff] [ 0.000000] NODE_DATA [mem 0x31dff1000-0x31dff4fff] [ 0.000000] [ffffea0000000000-ffffea000affffff] PMD -> [ffff880311600000-ffff88031bffffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x31dffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xdf19efff] [ 0.000000] node 0: [mem 0xdf7ff000-0xdf7fffff] [ 0.000000] node 0: [mem 0x100000000-0x31dffffff] [ 0.000000] On node 0 totalpages: 3133756 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12438 pages used for memmap [ 0.000000] DMA32 zone: 909728 pages, LIFO batch:31 [ 0.000000] Normal zone: 30352 pages used for memmap [ 0.000000] Normal zone: 2220032 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf19f000-0xdf69efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf69f000-0xdf79efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf79f000-0xdf7fefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd20000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88031dc00000 s85888 r8192 d20608 u262144 [ 0.000000] pcpu-alloc: s85888 r8192 d20608 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3090889 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: vga=788 initrd=/install.amd/initrd.gz rescue/enable=true -- quiet BOOT_IMAGE=/install.amd/vmlinuz [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 12277588K/12535024K available (4718K kernel code, 679K rwdata, 1592K rodata, 972K init, 932K bss, 257436K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2192.779 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4385.55 BogoMIPS (lpj=8771116) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000030] Security Framework initialized [ 0.000034] AppArmor: AppArmor disabled by boot time parameter [ 0.000035] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.001038] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.004528] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.006026] Mount-cache hash table entries: 256 [ 0.006204] Initializing cgroup subsys memory [ 0.006215] Initializing cgroup subsys devices [ 0.006217] Initializing cgroup subsys freezer [ 0.006218] Initializing cgroup subsys net_cls [ 0.006220] Initializing cgroup subsys blkio [ 0.006221] Initializing cgroup subsys perf_event [ 0.006243] Disabled fast string operations [ 0.006245] CPU: Physical Processor ID: 0 [ 0.006245] CPU: Processor Core ID: 0 [ 0.006250] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.006250] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.006253] mce: CPU supports 9 MCE banks [ 0.006266] CPU0: Thermal monitoring enabled (TM1) [ 0.006275] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.006275] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.006275] tlb_flushall_shift: 5 [ 0.006355] Freeing SMP alternatives memory: 20K (ffffffff8199e000 - ffffffff819a3000) [ 0.007314] ACPI: Core revision 20130725 [ 0.013012] ACPI: All ACPI Tables successfully acquired [ 0.013986] dmar: Host address width 36 [ 0.013988] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.013994] dmar: IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.013995] dmar: RMRR base: 0x000000df4d5000 end: 0x000000df4ebfff [ 0.014066] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0 [ 0.014067] HPET id 0 under DRHD base 0xfed91000 [ 0.014068] HPET id 0 under DRHD base 0xfed91000 [ 0.014069] HPET id 0 under DRHD base 0xfed91000 [ 0.014070] HPET id 0 under DRHD base 0xfed91000 [ 0.014071] HPET id 0 under DRHD base 0xfed91000 [ 0.014072] HPET id 0 under DRHD base 0xfed91000 [ 0.014072] HPET id 0 under DRHD base 0xfed91000 [ 0.014073] HPET id 0 under DRHD base 0xfed91000 [ 0.014200] Enabled IRQ remapping in x2apic mode [ 0.014202] Enabling x2apic [ 0.014203] Enabled x2apic [ 0.014208] Switched APIC routing to cluster x2apic. [ 0.014654] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.054338] smpboot: CPU0: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz (fam: 06, model: 2a, stepping: 07) [ 0.054346] TSC deadline timer enabled [ 0.054354] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.054361] ... version: 3 [ 0.054362] ... bit width: 48 [ 0.054363] ... generic registers: 4 [ 0.054364] ... value mask: 0000ffffffffffff [ 0.054365] ... max period: 0000ffffffffffff [ 0.054366] ... fixed-purpose events: 3 [ 0.054367] ... event mask: 000000070000000f [ 0.065691] Disabled fast string operations [ 0.067900] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.078946] Disabled fast string operations [ 0.092095] Disabled fast string operations [ 0.105249] Disabled fast string operations [ 0.118401] Disabled fast string operations [ 0.131554] Disabled fast string operations [ 0.054645] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK [ 0.144702] Disabled fast string operations [ 0.146823] Brought up 8 CPUs [ 0.146827] smpboot: Total of 8 processors activated (35084.46 BogoMIPS) [ 0.154254] devtmpfs: initialized [ 0.157422] PM: Registering ACPI NVS region [mem 0xdf69f000-0xdf79efff] (1048576 bytes) [ 0.157612] NET: Registered protocol family 16 [ 0.157702] cpuidle: using governor ladder [ 0.157703] cpuidle: using governor menu [ 0.157731] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.157732] ACPI: bus type PCI registered [ 0.157734] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.157994] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.157997] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.163015] PCI: Using configuration type 1 for base access [ 0.163752] bio: create slab at 0 [ 0.163903] ACPI: Added _OSI(Module Device) [ 0.163905] ACPI: Added _OSI(Processor Device) [ 0.163906] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.163907] ACPI: Added _OSI(Processor Aggregator Device) [ 0.165261] ACPI: EC: EC description table is found, configuring boot EC [ 0.169565] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.206651] ACPI: SSDT 00000000df68c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.207002] ACPI: Dynamic OEM Table Load: [ 0.207004] ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.222418] ACPI: SSDT 00000000df68bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.222759] ACPI: Dynamic OEM Table Load: [ 0.222761] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.239460] ACPI: Interpreter enabled [ 0.239467] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571) [ 0.239472] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.239485] ACPI: (supports S0 S3 S4 S5) [ 0.239486] ACPI: Using IOAPIC for interrupt routing [ 0.239513] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.240226] ACPI: ACPI Dock Station Driver: 2 docks/bays found [ 0.254725] ACPI: Power Resource [PUBS] (on) [ 0.258956] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.259045] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11) [ 0.259129] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.259213] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.259296] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11) [ 0.259363] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.259448] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11) [ 0.259531] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11) [ 0.259576] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.259754] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.259924] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d [ 0.259925] acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.259955] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.260093] PCI host bridge to bus 0000:00 [ 0.260096] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.260098] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.260099] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.260101] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.260103] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff] [ 0.260104] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff] [ 0.260112] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.260187] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.260219] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.260304] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.260330] pci 0000:00:16.0: reg 0x10: [mem 0xf5225000-0xf522500f 64bit] [ 0.260408] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.260478] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.260497] pci 0000:00:19.0: reg 0x10: [mem 0xf5200000-0xf521ffff] [ 0.260506] pci 0000:00:19.0: reg 0x14: [mem 0xf522b000-0xf522bfff] [ 0.260516] pci 0000:00:19.0: reg 0x18: [io 0x6040-0x605f] [ 0.260580] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.260615] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.260651] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.260673] pci 0000:00:1a.0: reg 0x10: [mem 0xf522a000-0xf522a3ff] [ 0.260764] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.260799] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.260836] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.260853] pci 0000:00:1b.0: reg 0x10: [mem 0xf5220000-0xf5223fff 64bit] [ 0.260922] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.260963] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.260995] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.261068] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.261133] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.261213] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.261279] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.261359] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.261397] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.261431] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.261559] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.261638] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.261660] pci 0000:00:1d.0: reg 0x10: [mem 0xf5229000-0xf52293ff] [ 0.261752] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.261787] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.261822] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 [ 0.261985] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.262005] pci 0000:00:1f.2: reg 0x10: [io 0x6068-0x606f] [ 0.262013] pci 0000:00:1f.2: reg 0x14: [io 0x607c-0x607f] [ 0.262021] pci 0000:00:1f.2: reg 0x18: [io 0x6060-0x6067] [ 0.262029] pci 0000:00:1f.2: reg 0x1c: [io 0x6078-0x607b] [ 0.262037] pci 0000:00:1f.2: reg 0x20: [io 0x6020-0x603f] [ 0.262045] pci 0000:00:1f.2: reg 0x24: [mem 0xf5228000-0xf52287ff] [ 0.262092] pci 0000:00:1f.2: PME# supported from D3hot [ 0.262151] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.262172] pci 0000:00:1f.3: reg 0x10: [mem 0xf5224000-0xf52240ff 64bit] [ 0.262194] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.262318] pci 0000:01:00.0: [10de:1057] type 00 class 0x030000 [ 0.262331] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff] [ 0.262346] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.262360] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.262370] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f] [ 0.262379] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.262479] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300 [ 0.262492] pci 0000:01:00.1: reg 0x10: [mem 0xf3000000-0xf3003fff] [ 0.270201] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.270209] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.270215] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf30fffff] [ 0.270224] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.270332] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.270435] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000 [ 0.270480] pci 0000:03:00.0: reg 0x10: [mem 0xf5100000-0xf5101fff 64bit] [ 0.270700] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.278215] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.278230] pci 0000:00:1c.1: bridge window [mem 0xf5100000-0xf51fffff] [ 0.278366] acpiphp: Slot [1] registered [ 0.278374] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.278378] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.278382] pci 0000:00:1c.3: bridge window [mem 0xf4900000-0xf50fffff] [ 0.278388] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf38fffff 64bit pref] [ 0.278554] pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001 [ 0.278573] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [ 0.278599] pci 0000:0d:00.0: reg 0x10: [mem 0xf4101000-0xf41010ff] [ 0.278796] pci 0000:0d:00.0: supports D1 D2 [ 0.278797] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.278928] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010 [ 0.278955] pci 0000:0d:00.3: reg 0x10: [mem 0xf4100000-0xf41007ff] [ 0.279150] pci 0000:0d:00.3: supports D1 D2 [ 0.279151] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.286270] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 0.286280] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.286288] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf48fffff] [ 0.286302] pci 0000:00:1c.4: bridge window [mem 0xf3900000-0xf40fffff 64bit pref] [ 0.287285] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.287296] ACPI: \_SB_.PCI0: notify handler is installed [ 0.287335] Found 1 acpi root devices [ 0.287393] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.287468] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.287470] vgaarb: loaded [ 0.287471] vgaarb: bridge control possible 0000:01:00.0 [ 0.287505] PCI: Using ACPI for IRQ routing [ 0.289080] PCI: pci_cache_line_size set to 64 bytes [ 0.289224] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.289225] e820: reserve RAM buffer [mem 0xdf19f000-0xdfffffff] [ 0.289227] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff] [ 0.289228] e820: reserve RAM buffer [mem 0x31e000000-0x31fffffff] [ 0.289324] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.289329] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.291356] Switched to clocksource hpet [ 0.292742] pnp: PnP ACPI init [ 0.292751] ACPI: bus type PNP registered [ 0.293135] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.293138] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.293140] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.293141] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.293143] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.293145] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.293147] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.293148] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.293150] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.293152] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.293154] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.293155] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.293157] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.293159] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.293161] system 00:00: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.293163] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.293164] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.293167] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.293265] system 00:01: [io 0x0400-0x047f] could not be reserved [ 0.293267] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.293269] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.293271] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.293273] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.293275] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.293277] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved [ 0.293279] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.293281] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.293282] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.293284] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.293286] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.293288] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293343] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.293352] pnp 00:03: [dma 4] [ 0.293368] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.293387] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.293418] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.293442] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.293465] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.293489] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) [ 0.293533] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.293958] pnp: PnP ACPI: found 10 devices [ 0.293960] ACPI: bus type PNP unregistered [ 0.300177] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 0.300194] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.300197] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.300199] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 0.300229] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.300230] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.300232] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.300236] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf5300000-0xf54fffff] [ 0.300239] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf5500000-0xf56fffff 64bit pref] [ 0.300241] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.300244] pci 0000:01:00.0: BAR 6: assigned [mem 0xf3080000-0xf30fffff pref] [ 0.300246] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.300248] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.300251] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf30fffff] [ 0.300254] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.300257] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.300260] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.300265] pci 0000:00:1c.0: bridge window [mem 0xf5300000-0xf54fffff] [ 0.300269] pci 0000:00:1c.0: bridge window [mem 0xf5500000-0xf56fffff 64bit pref] [ 0.300276] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.300281] pci 0000:00:1c.1: bridge window [mem 0xf5100000-0xf51fffff] [ 0.300290] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.300293] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.300298] pci 0000:00:1c.3: bridge window [mem 0xf4900000-0xf50fffff] [ 0.300302] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf38fffff 64bit pref] [ 0.300308] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 0.300312] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.300319] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf48fffff] [ 0.300324] pci 0000:00:1c.4: bridge window [mem 0xf3900000-0xf40fffff 64bit pref] [ 0.300333] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.300334] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.300336] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.300338] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff] [ 0.300339] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff] [ 0.300341] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 0.300342] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf30fffff] [ 0.300344] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.300345] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.300347] pci_bus 0000:02: resource 1 [mem 0xf5300000-0xf54fffff] [ 0.300348] pci_bus 0000:02: resource 2 [mem 0xf5500000-0xf56fffff 64bit pref] [ 0.300350] pci_bus 0000:03: resource 1 [mem 0xf5100000-0xf51fffff] [ 0.300352] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 0.300353] pci_bus 0000:05: resource 1 [mem 0xf4900000-0xf50fffff] [ 0.300355] pci_bus 0000:05: resource 2 [mem 0xf3100000-0xf38fffff 64bit pref] [ 0.300356] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] [ 0.300358] pci_bus 0000:0d: resource 1 [mem 0xf4100000-0xf48fffff] [ 0.300359] pci_bus 0000:0d: resource 2 [mem 0xf3900000-0xf40fffff 64bit pref] [ 0.300444] NET: Registered protocol family 2 [ 0.300775] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.301140] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.301276] TCP: Hash tables configured (established 131072 bind 65536) [ 0.301299] TCP: reno registered [ 0.301319] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.301384] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.301521] NET: Registered protocol family 1 [ 0.301812] pci 0000:01:00.0: Boot video device [ 0.301877] PCI: CLS 64 bytes, default 64 [ 0.301915] Unpacking initramfs... [ 0.406275] Freeing initrd memory: 5176K (ffff88007faf1000 - ffff88007ffff000) [ 0.406284] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.406286] software IO TLB [mem 0xdb19f000-0xdf19f000] (64MB) mapped at [ffff8800db19f000-ffff8800df19efff] [ 0.406857] audit: initializing netlink socket (disabled) [ 0.406868] type=2000 audit(1388693677.396:1): initialized [ 0.420391] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.421084] VFS: Disk quotas dquot_6.5.2 [ 0.421115] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.421200] msgmni has been set to 23989 [ 0.421479] alg: No test for stdrng (krng) [ 0.421507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.421552] io scheduler noop registered [ 0.421554] io scheduler deadline registered [ 0.421581] io scheduler cfq registered (default) [ 0.421729] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X [ 0.421768] pcieport 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.422149] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.422161] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.422181] vesafb: mode is 800x600x16, linelength=1600, pages=2 [ 0.422182] vesafb: scrolling: redraw [ 0.422184] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.422347] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90005c80000, using 1875k, total 14336k [ 0.436527] Console: switching to colour frame buffer device 100x37 [ 0.450544] fb0: VESA VGA frame buffer device [ 0.450554] intel_idle: MWAIT substates: 0x21120 [ 0.450556] intel_idle: v0.4 model 0x2A [ 0.450556] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.450742] GHES: HEST is not enabled! [ 0.450784] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.451140] Linux agpgart interface v0.103 [ 0.451227] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.456161] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.456166] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.456274] mousedev: PS/2 mouse device common for all mice [ 0.456298] rtc_cmos 00:06: RTC can wake from S4 [ 0.456428] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.456458] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.456467] Intel P-state driver initializing. [ 0.456478] Intel pstate controlling: cpu 0 [ 0.456490] Intel pstate controlling: cpu 1 [ 0.456500] Intel pstate controlling: cpu 2 [ 0.456508] Intel pstate controlling: cpu 3 [ 0.456524] Intel pstate controlling: cpu 4 [ 0.456533] Intel pstate controlling: cpu 5 [ 0.456542] Intel pstate controlling: cpu 6 [ 0.456551] Intel pstate controlling: cpu 7 [ 0.456575] AMD IOMMUv2 driver by Joerg Roedel [ 0.456576] AMD IOMMUv2 functionality not available on this system [ 0.456670] TCP: cubic registered [ 0.456803] NET: Registered protocol family 10 [ 0.457003] mip6: Mobile IPv6 [ 0.457005] NET: Registered protocol family 17 [ 0.457008] mpls_gso: MPLS GSO support [ 0.457270] registered taskstats version 1 [ 0.458232] rtc_cmos 00:06: setting system clock to 2014-01-02 20:14:37 UTC (1388693677) [ 0.458270] PM: Hibernation image not present or could not be loaded. [ 0.458925] Freeing unused kernel memory: 972K (ffffffff818ab000 - ffffffff8199e000) [ 0.458927] Write protecting the kernel read-only data: 8192k [ 0.460327] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.462359] Freeing unused kernel memory: 1416K (ffff88000149e000 - ffff880001600000) [ 0.463447] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000) [ 0.481638] systemd-udevd[85]: starting version 204 [ 0.497041] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.497047] ACPI: Thermal Zone [THM0] (59 C) [ 0.501045] ACPI: bus type USB registered [ 0.501077] usbcore: registered new interface driver usbfs [ 0.501090] usbcore: registered new interface driver hub [ 0.501566] usbcore: registered new device driver usb [ 0.501881] SCSI subsystem initialized [ 0.502123] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.502598] ehci-pci: EHCI PCI platform driver [ 0.502727] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.502738] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.502745] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.502762] ehci-pci 0000:00:1a.0: debug port 2 [ 0.503322] sdhci: Secure Digital Host Controller Interface driver [ 0.503325] sdhci: Copyright(c) Pierre Ossman [ 0.503723] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 5) [ 0.503779] pcieport 0000:00:1c.4: driver skip pci_set_master, fix it! [ 0.504216] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [ 0.505010] libata version 3.00 loaded. [ 0.506675] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.506688] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf522a000 [ 0.515413] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.515663] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.515667] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.515669] usb usb1: Product: EHCI Host Controller [ 0.515670] usb usb1: Manufacturer: Linux 3.12-1-amd64 ehci_hcd [ 0.515672] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.515807] hub 1-0:1.0: USB hub found [ 0.515827] hub 1-0:1.0: 3 ports detected [ 0.516117] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.516123] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.516128] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.516143] ehci-pci 0000:00:1d.0: debug port 2 [ 0.520039] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.520057] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf5229000 [ 0.531428] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.531464] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.531466] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.531468] usb usb2: Product: EHCI Host Controller [ 0.531469] usb usb2: Manufacturer: Linux 3.12-1-amd64 ehci_hcd [ 0.531471] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.531579] hub 2-0:1.0: USB hub found [ 0.531585] hub 2-0:1.0: 3 ports detected [ 0.531745] ahci 0000:00:1f.2: version 3.0 [ 0.531846] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 0.531882] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.547525] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 0.547530] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.547536] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.572336] scsi0 : ahci [ 0.572868] scsi1 : ahci [ 0.573166] scsi2 : ahci [ 0.573467] scsi3 : ahci [ 0.573776] scsi4 : ahci [ 0.574036] scsi5 : ahci [ 0.574117] ata1: SATA max UDMA/133 abar m2048@0xf5228000 port 0xf5228100 irq 42 [ 0.574122] ata2: SATA max UDMA/133 abar m2048@0xf5228000 port 0xf5228180 irq 42 [ 0.574124] ata3: DUMMY [ 0.574127] ata4: SATA max UDMA/133 abar m2048@0xf5228000 port 0xf5228280 irq 42 [ 0.574131] ata5: SATA max UDMA/133 abar m2048@0xf5228000 port 0xf5228300 irq 42 [ 0.574132] ata6: DUMMY [ 0.575492] firewire_ohci 0000:0d:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 0.827610] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.891515] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.892342] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.892346] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.892348] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.892657] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 0.892661] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133 [ 0.892662] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.893156] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.893160] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.893162] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.893489] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 0.893623] ata1.00: configured for UDMA/133 [ 0.894013] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5 [ 0.960271] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.960280] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.961052] hub 1-1:1.0: USB hub found [ 0.961225] hub 1-1:1.0: 6 ports detected [ 1.075621] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.075798] firewire_core 0000:0d:00.3: created device fw0: GUID f0def1ff5a3903ff, S400 [ 1.208059] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.208068] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.208710] hub 2-1:1.0: USB hub found [ 1.208834] hub 2-1:1.0: 8 ports detected [ 1.211498] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.213836] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1.214135] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1.214144] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.215658] ata2.00: ATAPI: HL-DT-STDVDRAM GT33N, LT20, max UDMA/66 [ 1.218452] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1.218683] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1.218690] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.220205] ata2.00: configured for UDMA/66 [ 1.221970] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT33N LT20 PQ: 0 ANSI: 5 [ 1.279799] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 1.403531] tsc: Refined TSC clocksource calibration: 2192.877 MHz [ 1.539573] ata4: SATA link down (SStatus 0 SControl 300) [ 1.574551] usb 1-1.1: New USB device found, idVendor=090c, idProduct=1000 [ 1.574559] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.574564] usb 1-1.1: SerialNumber: 11052417002144 [ 1.579836] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 1.580242] scsi6 : usb-storage 1-1.1:1.0 [ 1.580382] usbcore: registered new interface driver usb-storage [ 1.647631] usb 1-1.6: new high-speed USB device number 4 using ehci-pci [ 1.746307] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217 [ 1.746315] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.746320] usb 1-1.6: Product: Integrated Camera [ 1.746323] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. [ 1.859626] ata5: SATA link down (SStatus 0 SControl 300) [ 1.867914] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.867923] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.868047] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.868093] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.868101] sd 0:0:0:0: [sda] Write Protect is off [ 1.868104] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.868121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.869656] sda: sda1 sda2 [ 1.869656] sda1: [ 1.870131] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.870228] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.870450] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.403721] Switched to clocksource tsc [ 2.720298] scsi 6:0:0:0: Direct-Access PQ: 0 ANSI: 0 CCS [ 2.720701] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.721743] sd 6:0:0:0: [sdb] 7636800 512-byte logical blocks: (3.91 GB/3.64 GiB) [ 2.722584] sd 6:0:0:0: [sdb] Write Protect is off [ 2.722587] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 2.723456] sd 6:0:0:0: [sdb] No Caching mode page found [ 2.723459] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2.726696] sd 6:0:0:0: [sdb] No Caching mode page found [ 2.726699] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2.727622] sdb: sdb1 sdb2 [ 2.730711] sd 6:0:0:0: [sdb] No Caching mode page found [ 2.730717] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2.730721] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 6.819573] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 6.822074] ISO 9660 Extensions: RRIP_1991A [ 25.883807] pps_core: LinuxPPS API ver. 1 registered [ 25.883811] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 25.884170] PTP clock support registered [ 25.884927] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 25.884930] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 25.885067] e1000e 0000:00:19.0: setting latency timer to 64 [ 25.885139] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 25.885168] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 25.889619] cfg80211: Calling CRDA to update world regulatory domain [ 25.890860] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 25.890863] Copyright(c) 2003-2013 Intel Corporation [ 25.890919] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it! [ 25.890986] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 25.891052] iwlwifi 0000:03:00.0: irq 44 for MSI/MSI-X [ 25.891240] iwlwifi 0000:03:00.0: firmware: failed to load iwlwifi-6000-4.ucode (-2) [ 25.904702] iwlwifi 0000:03:00.0: no suitable firmware found! [ 26.065331] e1000e 0000:00:19.0 eth0: registered PHC clock [ 26.065336] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:5a:39:03 [ 26.065338] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 26.065397] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 27.362696] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 27.465490] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 27.465790] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.370774] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 29.473636] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 29.473912] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.451031] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 32.451078] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 51.487044] raid6: sse2x1 5628 MB/s [ 51.555046] raid6: sse2x2 7354 MB/s [ 51.623045] raid6: sse2x4 8509 MB/s [ 51.623047] raid6: using algorithm sse2x4 (8509 MB/s) [ 51.623048] raid6: using ssse3x2 recovery algorithm [ 51.623240] xor: automatically using best checksumming function: [ 51.663048] avx : 16895.000 MB/sec [ 51.665674] bio: create slab at 1 [ 51.665856] Btrfs loaded [ 51.674873] JFS: nTxBlock = 8192, nTxLock = 65536 [ 51.681007] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 51.686656] md: raid0 personality registered for level 0 [ 51.688145] md: raid1 personality registered for level 1 [ 51.689577] async_tx: api initialized (async) [ 51.690521] md: raid6 personality registered for level 6 [ 51.690523] md: raid5 personality registered for level 5 [ 51.690525] md: raid4 personality registered for level 4 [ 51.694188] device-mapper: uevent: version 1.0.3 [ 51.694241] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com